08/20/2015 | By Scott Siegal
What if your new hire can’t do their job properly? What if they get those small-but-important details wrong? What if they can’t function on a team and they can’t take direction or criticism? What if they just don’t fit in with the rest of your crew?
You have to take all of those questions (and more) into consideration when you’re figuring out how to hire good employees.
It doesn’t matter if you’re looking to hire an additional member for your roofing crew or an office assistant– a good employee does their job without fail, takes direction, gets along with everyone, and ultimately, makes your life easier.
If you hire a talented siding installer, but he never makes it to the job on time and always argues with the project manager, it’s not a good fit, regardless of how impeccable his work is.
That type of employee adds elements of doubt, uncertainty, and stress for everyone else on the job site. He also adds stress for you and your office staff– after all, you’re the one that has to explain why his behavior is acceptable, right?
Employee turnover is also expensive. On-boarding and training a new hire costs time and money. It’s best not to repeat the process often.
There’s never a 100% guarantee any new hire will work out, but you can substantially reduce the risk of a poor fit by following these five best practices.
1. Understand the Job Before You Hire
Before you can expect a potential hire to jump through your hoops and answer your questions, you have to know what you expect of them. That can include specific installation techniques and equipment qualifications for crew members, but it can also include a list of daily, weekly, and monthly tasks for office personnel.
RoofingContractor.Com lays out the finer points of figuring out the job description and defining expectations:
“A fundamental first step [in the hiring process] is therefore to determine the specific attributes of the position. This can be accomplished by interviewing employees and supervisors to determine what knowledge, skills and abilities are required for the job. For example, employers can assemble a group of subject matter experts — supervisors and employees with experience performing and knowledge of the job — and have those experts formulate a list of attributes and skills necessary for the job. Employers can then base interview questions and qualifications off of those skills and attributes.”
What do your crew members have to do regularly? What stresses them out? What do they wish they were better at? By better understanding your current employees, you’re more prepared for the hiring process.
After you hire a new employee, you need to tell them your expectations. You can start explaining expectations during the interview process, but you have to know what those expectations are, first.
Even if you don’t have an HR person, know your policies on time off, vacation, and sick leave. Write those policies down. Make a guidebook that you and your employees, both current and future, can reference at any time. If there’s a policy question, you should have an answer.
Especially before the hiring process starts.
Before you interview an employee and research them further, you need to check the credentials they provide. That includes their resume and cover letter, and can possibly include samples of prior work (photos of completed projects, etc).
Resumes can be fabricated, but they can give you some good insights into an employee’s past work and how they think about themselves, former employers, and the work itself. It seems obvious, but you might not want to hire a deck builder who shows contempt for building decks.
When checking a potential new hire’s resume:
- Make sure their listed work experience and skills match the job you’re hiring for. A good potential employee is someone who tailors their resume to the position you’re hiring for. They should demonstrate how their past experience will benefit you, not just put down a generic list of skills and prior job duties. If they try to show how they’re a good fit through their resume, it demonstrates that they’ve put some thought into it. It shows they care.
- Make sure their resume is free of typos and grammatical errors. Someone who takes the time to proofread their resume is someone who’s invested in their own success. It also shows they pay attention to detail and they value the time of whoever’s going over their resume. People aren’t perfect when it comes to spelling and grammar, but you can always tell a strong effort apart from someone who didn’t even run spellcheck.
- Make sure their resume isn’t too boastful. A good employee knows their own strengths, and they should let you know about their skills in a concise, simple way. It should read much more “this is what I can do” than “hey, look at me!” If someone boasts too much on their resume, there’s a greater chance they’re faking it or fabricating something.
- Look for specifics. Potential employees who list real projects as examples of their workmanship are usually good hires. If you’re looking for a new roofer, you want a resume that demonstrates the new hire’s familiarity with different materials and their aptitude for getting a job done on time and under budget. Those things often come up in the interview process, but if they list specifics in their resume, you’ll know their head is in the right place.
- Watch out for padding. Some people pad their resumes with irrelevant information just so they have something to put down on paper. Not every good new hire has 20 years of construction experience, but you should be able to spot the difference between fluff and substance.
Additionally, you’ll want to check for length-of-employment and employment gaps. Some good workers will have a stretch of unemployment, especially with how hard the recession hit the construction and home remodelling industries in some parts of the country. If a roofer didn’t work for six months, that might not be a red flag. But it’s probably a red flag if he only lasted less than a year with all of his previous employers.
If something regarding employment gaps seems suspicious, or you’re just curious about it, ask during the interview process.
Dutifully checking through the materials your potential new hire provides is important, but it doesn’t end there.
3. Checking References, Backgrounds, and Other Essentials
After you’ve gone over a potential new hire’s resume and other materials, it’s time to check their provided references.
If the person you’re screening hasn’t provided references, you have two choices:
- If they seem like they could be a good fit, ask for references. It’s possible they’ve been out of the job search game for a while and didn’t know to include them. It’s also possible they just forgot.
- If you’re on the fence about someone after their resume, and they didn’t provide any references, it’s probably best to move on. You can make better use of your time screening someone else.
Christine Lagorio-Chafkin over at Inc writes:
“Of three references, have a phone conversation with at least two, and pay attention to the tone of their recommendation, not just its content. It’s not necessarily legal to hamper future employment for a past employee, so savvy references won’t say anything negative. As an out, they’ll say very little at all. Some human resources experts recommend checking a reference that’s not recommended: hunt down a person at the applicant’s most recent workplace who knew them well, and ask their opinion as well.”
Also look at the variety of references. Are they all from the same business? Are they from recent contacts, or contacts from the distant past?
CCS Construction Staffing recommends asking references the following questions:
- Was the candidate offered or eligible for any promotions?
- Did he or she work well with co-workers?
- What are the candidate’s strengths and work habits?
- Would the previous employer hire them again?”
Next, it’s time for a background check. There’s a certain amount of background information you can find on your own. Most states have a criminal repository that can tell you about your potential new hire’s criminal background, including traffic violation. Search.org can help you get started.
You can also requisition a background check from a private company. That can be costly, but if you’re looking for a long-term employee, it’s often better safe than sorry.
Many employers also perform a social media check. If that’s something you want to pursue, you have to be careful. If someone you’re screening commonly trashes old employers, demonstrates a negative demeanor, and regularly talks about drug and alcohol abuse, they’re probably not a good fit.
Still, there’s only so much information from social media you can use to screen potential employees.
“Much of the information on social media cannot be used in the decision-making process. Any clues about sexual orientation, religion and gender can be prominent on social media, but cannot influence your hiring process. If the candidate feels that they were wrongfully discriminated against, they may pursue legal action.”
Stay Tuned – There’s More to Come
Be sure to check back soon for the second part of our Now Hiring series. Numbers four and five just might be the most important steps of all!
Building The Best,
Read More Blogs Like This
4 Tips for Improving Construction Project Management
Construction projects include various individual steps and tasks, which can make it difficult to stay on track with your budget and timeline. From the initiation phase to close-out, construction projects are complex and lengthy. Here, the professionals at CCN walk through four tips to make project management simple. Have A Thorough Understanding of the Project …
Technology Tips for Contractors: Building Information Modeling (BIM) Gaining on CAD
Building Information Modeling technology (BIM) is a process that involves the creation of digital models including physical and functional aspects of home remodeling. BIM is facilitated by a variety of tools, technology, and agreements. It is continuing to make advances in everyday home construction and remodeling after being recognized as a key influence in substantial…
Top Roofing Materials for Severe Weather Conditions
Roofs are constructed to repel against heavy rain, thunderstorms, hurricanes, winds, snow, hail, and other major weather conditions. Although most roofs provide protection from these conditions, certain roofing materials have an advantage over others during severe weather conditions. Below, the home improvement professionals at Certified Contractors Network detail the benefits of some of the most…
Worker Safety in the Construction Industry
Construction sites are a naturally dangerous setting even when safety is a top priority. As an owner or manager in the contracting industry, it is essential that you take action to protect your company’s employees. Below, the experienced professionals at Certified Contractors Network discuss the importance of worker safety and what to do as an…
Lead Generation for Contractors: Top Seven Technologies to Consider
Trust plays an essential role in gaining customers and obtaining contracts, and a key driver in lead generation. Traditional lead generation strategies such as television commercials, billboard ads, and radio ads have been less successful with the advancement of technology. Lead generation companies allow contractors to generate exceptional leads. Below, the experienced contractors at Certified…
Operations of a Human Resources Manager in the Construction Industry
Human resources is a fundamental department in the construction industry. Without human resources, a construction project cannot be completed successfully. Below the experienced professionals at Certified Contractors Network discuss the functions and importance of human resources in the construction industry. Roles and Responsibilities of an HR Manager In Contracting Human resources management encompasses everything from…
Five Tips to Avoid Water Damage Insurance Claims for Roofers
Water damage to a homeowner’s property as a result of a leak or unanticipated thunderstorm is the leading cause of insurance claims in the roofing industry. Unfortunately, even if you and the homeowners do everything right, water damage can still occur and lead to expensive insurance claims. If these claims are not handled quickly and…
Rising Material Costs to Continue in 2021
The Producer Price Index for construction goods rose 5% over the three-year period ending in November 2020, per the Association of General Contractors. There are many factors causing the rising cost of materials. Tariffs and trade issues drive costs up, as do environmental regulation and changing demand. Many projects require lumber, steel, fuel and…
Technology Tips for Contractors: Frequently Asked Questions on QuickBooks for Contractors
Sloppy bookkeeping and billing practices is one of the most basic drivers of underperforming contracting companies. Maintaining good bookkeeping is essential to profitability for companies and peace of mind for owners. Intuit’s QuickBooks software has served as the industry standard for bookkeeping across nearly all industries for decades. Construction is no exception to this rule. …
HR Tips for Contractors: Employee Retention for Contractors Paramount Amidst Labor Shortage
The labor shortage for builders is well documented, with some research suggesting as much as 80% of construction companies reporting not being able to find enough skilled workers. While statistics like that tend to grab the headlines, the more important part of the story for contractors is how significant that makes employee retention and development…